TEVKO, transformadores y subestaciones de potencia

Video

Bushing creepage distance and pollution

Duration
32 seconds
Language
Spoken in English
Captions
English captions, switchable from the player
Published
Published November 12, 2026

What is behind this video

The sheds on bushings at a petrochemical plant are not for the rain: they lengthen the path current must travel along the surface. Near the sea, IEC 60815 calls for up to 53.7 mm/kV. Salt or dust plus dew makes the surface conductive and the path gets shorter.

Not for the rain. They lengthen the creepage distance: current trying to escape along the surface has to climb up and down every shed. In a straight line the path would be short; with sheds it becomes long, like a mountain road. That is insulation design, not decoration.

In very heavy pollution, class e, the standard calls for up to 53.7 millimeters per kilovolt of unified specific creepage distance. That class includes sites by the sea with salt mist. The figure is not a catalog flourish: it is the minimum surface path the insulator should provide in that environment.

Salt or dust, together with dew, makes the surface conductive. The electrical path no longer follows every shed and becomes shorter, even if the insulator has not lost material. At a plant near the sea it is worth checking the condition of that surface, not only the bushing's original geometry.

The references behind what the video says are: IEC 60815, site severity class e (very heavy): up to 53.7 mm/kV, including coastal sites with salt mist.

This piece is animation and typography: it does not show TEVKO personnel. The figures are the ones in the script and can be checked against this page and the linked pages.

Transcript — English audio

Why do bushings at a petrochemical plant have sheds? Not for the rain.

They're there to make the path longer. Current escaping along the surface has to climb up and down every shed.

Like a mountain road: close in a straight line, far behind the wheel. Near the sea, the IEC standard calls for up to 53.7 mm/kV.

But watch out: salt or dust plus dew make the surface conductive, and the path gets shorter. So it's not decoration.

It's distance. Is your plant near the sea?

Comment SHEDS and we'll tell you what to check.

The same captions ship as a WebVTT track inside the player. The spoken close invites a comment on the network where the video was posted. On this page the contact is ventas@tevko.com and the phone +52 33 2101 7241.

Questions this video answers

Why do transformer bushings have sheds?

Not for the rain. They lengthen the creepage distance: current trying to escape along the surface has to climb up and down every shed. In a straight line the path would be short; with sheds it becomes long, like a mountain road. That is insulation design, not decoration.

What does IEC 60815 require near the sea?

In very heavy pollution, class e, the standard calls for up to 53.7 millimeters per kilovolt of unified specific creepage distance. That class includes sites by the sea with salt mist. The figure is not a catalog flourish: it is the minimum surface path the insulator should provide in that environment.

What shortens creepage distance in the field?

Salt or dust, together with dew, makes the surface conductive. The electrical path no longer follows every shed and becomes shorter, even if the insulator has not lost material. At a plant near the sea it is worth checking the condition of that surface, not only the bushing's original geometry.

Related pages

Technical content reviewed by TEVKO Technical Management · last reviewed: November 12, 2026

Request a technical assessment

Write to our sales inbox with the following and we will tell you what the next step is:

  • The nameplate: rating, voltage, make and serial number.
  • The location of the installation.
  • The problem the unit presents, or the event that occurred.
ventas@tevko.com